Hardrace Harden Engine Mount – Honda Civic/Crx/Integra
€303.25 Original price was: €303.25.€257.76Current price is: €257.76.
3 PCS/SET
For MT Use
Location: Left/Right/Rear side
Available – Delivery within 15 days
Hardrace Harden Engine Mount – Honda Civic/Crx/Integra (5826-A)
Product Overview
Over decades of high-RPM operation and harsh torque loads, original equipment fluid-filled or soft rubber mounts split, break down, and sag. This material failure permits the entire powertrain assembly to violently twist back and forth, resulting in delayed throttle response, precision-robbing gear shift misalignment, and traction-breaking frontend wheel hop.
The Hardrace Harden Engine Mount – Honda Civic/Crx/Integra (5826-A) kit is an uprated 3-piece primary powertrain stabilization solution engineered to secure your engine block firmly in position. Available at JDMaster.net, this heavy-duty set replaces your worn factory anchors with solid, high-durometer vulcanized hardened rubber mounts. By capturing the powertrain along its designated mechanical axis, this kit maximizes throttle feedback and acceleration efficiency without producing the harsh, cabin-rattling noise, vibration, and harshness (NVH) characteristic of solid polyurethane or aluminum race mounts.
Key Features & Benefits
-
Arrests Rotational Powertrain Twist: Heavily restrains engine rocking along the horizontal axis, translating engine power into immediate front wheel acceleration.
-
Signature High-Density Harden Rubber: Formulated from a non-porous, specialized anti-crack elastomeric compound that delivers exceptional load-bearing and shear resistance under load.
-
Targeted 3-Piece Primary Configuration: Replaces the three primary load-bearing structural positions in the engine bay—the main driver-side (left), transmission-side (right), and rear firewall mount.
-
Locks Shifter Alignment Plane: Keeps the transmission casing perfectly aligned relative to the chassis body, protecting mechanical shift linkages from binding to eliminate missed gears at high RPM.
-
Engineered Balance for Street Performance: Significantly stiffer than standard OEM rubber to handle spirited driving and track days, yet compliant enough to damp out harsh vibration for a street-friendly cabin experience.
-
Direct Bolt-On OEM Integration: Precision-molded to exact factory CAD measurements to drop directly into original chassis perches using standard mounting hardware.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 5826-A |
| Product Type | Heavy-Duty Reinforced Primary Engine Mount Set |
| Material Compound | High-Durometer Solid Performance Harden Rubber & Carbon Steel |
| Timing Side Bracket Profile | 2-Bolt Left-Hand Configuration Only |
| Transmission Compatibility | Manual Transmission (MT) Models Only |
| Quantity in Set | 3 Pieces / Core Engine Mount Kit (Left, Right, Rear) |
| Chassis Location | Powertrain Structural Castings to Subframe & Engine Bay Frame Rails |
Applications
This specific Part Number 5826-A 3-piece core kit is engineered for manual transmission chassis variations running the popular 2-bolt timing-side cast iron or steel left-hand bracket profile:
Chassis Fitment
-
Honda Civic 5th Gen (1992–1995 EG / EH / EJ Manual Models)
-
Honda Civic Del Sol (1993–1997 EG1 / EG2 Manual Models)
-
Honda Integra 3rd Gen (1994–2001 DC2 / DB7 / DB8 Manual Models – Note: Always verify timing side configuration, as some later models use a 3-bolt bracket pattern)
Engine Application Note
Designed to bolt natively onto factory D-Series (SOHC) or B-Series (DOHC VTEC) engine setups using a standard 2-bolt timing cover engine block bracket interface. Perfect for restoring standard geometry or securing clean B16A, B16A2, or B18C performance engine swaps into classic EG and DC2 chassis bays.
The Mechanical Advantage: Understanding the 5826 vs. 5826-A Core Layout
When building or restoring a classic Honda chassis, understanding your engine mount configuration is vital. While the standard Hardrace 5826 kit comes as a 5-piece package that includes the lower front torque mounts located near the radiator, the 5826-A kit is a targeted 3-piece set. It focuses exclusively on upgrading the three primary load-bearing mounting points: the left-hand driver mount, the right-hand transmission mount, and the structural rear firewall mount.
This 3-piece configuration is ideal for enthusiasts who are utilizing aftermarket traction bars that eliminate the factory front lower torque mount locations, or for drivers who prefer to run dedicated lower torque dampers separately. By utilizing Hardrace’s solid-molded performance rubber compound across these three primary anchors, all significant internal air voids are completely eliminated. Your engine is firmly secured, stopping the rotational weight shift that causes wheel hop and ensuring immediate power delivery out of corner apexes.
Professional Engine Support Lift Installation at JDMaster
Get it Fitted by the Specialists: Swapping out the primary 3-piece engine mount configuration requires securely supporting the powertrain weight from beneath or suspending it via a specialized engine hoist while unbolting critical structural subframe links—particularly the hard-to-reach rear firewall mount. High-torque chassis fasteners are prone to seizing over time, and improper component alignment during assembly can cause drivetrain binding or extreme cabin vibrations.
Skip the safety hazards and secure a lift appointment at the advanced JDMaster.net workshop. Our factory-trained automotive technicians will safely suspend your engine, inspect your chassis mounting brackets for physical fatigue, bolt in the new Hardrace units, and torque all primary hardware to exact factory specifications under real loaded weight distribution.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 3.3 kg |
|---|---|
| Dimensions | 21.2 × 20.9 × 13.3 cm |
| pa_fitments | EH, EJ1/2, Honda Civic 5th 1992-1996 EG, Honda Del sol EG1/2 1992-1998, Honda Integra DC2 1994-2001 |





