Hardrace Engine Mount Set – Honda Integra
€606.19 Original price was: €606.19.€515.26Current price is: €515.26.
4 PCS/SET
MT, Street Version
Available – Delivery within 15 days
Hardrace Engine Mount Set – Honda Integra (7566)
Product Overview
On high-performance K-series sports platforms, factory engine mounts are engineered primarily with soft rubber voids to buffer passengers from cabin vibration. However, when subjected to threshold acceleration, heavy braking, or rapid track-day gear changes, this built-in structural compliance allows the entire engine and transmission assembly to pitch violently forward and backward.
The Hardrace Engine Mount Set – Honda Integra (7566) is the definitive engineering solution to curb excessive powertrain rotation. Available at JDMaster.net, this comprehensive 4-piece reinforced street-spec upgrade substitutes worn, soft original mounts for high-durometer hardened rubber assemblies—firmly anchoring your engine block to the chassis to eliminate rotational torque loss without the teeth-chattering harshness of solid aluminum mounts.
Key Features & Benefits
-
Maximizes Drivetrain Power Efficiency: Greatly curtails high-torque engine “tilt” and rotational deflection, redirecting rotational kinetic energy immediately down through the axles to the front wheels.
-
Signature High-Durometer Harden Rubber: Manufactured using an exclusive anti-crack, heat-treated elastomeric matrix that yields severe mechanical resistance to tearing and high-load compression.
-
Sharper Gear Shifting Precision: Restores and locks standard manual shift linkage alignment parameters, eliminating missed shifts or mechanical binding caused by engine displacement during hard cornering.
-
Street-Optimized NVH Control: Engineered to offer an uncompromising direct connection between the drivetrain and chassis while effectively dampening harsh, abrasive engine harmonics compared to rigid polyurethane or solid inserts.
-
Comprehensive 4-Piece Replacement Set: Provides a complete structural refresh across your platform, upgrading the front, rear, left, and right primary structural drivetrain anchoring points.
-
Direct OEM Bolt-On Configuration: CAD-designed to slip cleanly into your original factory chassis brackets and engine block tabs, reusing standard fastening hardware without modifications.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 7566 |
| Product Type | Heavy-Duty Reinforced Engine & Transmission Mount Set |
| Bushing Compound | Proprietary High-Density Hardened Performance Rubber |
| Transmission Compatibility | Manual Transmission (MT) Models Only |
| Usage Profile | Street / Trackday Performance Version |
| Quantity in Set | 4 Pieces / Complete Powertrain Set (Front, Rear, Left, Right) |
| Chassis Interface | Drivetrain Structural Mount Brackets to Chassis Frames |
Applications
This specific Part Number 7566 high-density hardened rubber engine mount system is precisely engineered to match K-series configurations utilizing manual gearboxes:
-
Honda Integra Type R 4th Generation (2001–2006 DC5 Chassis with K20A Engine)
-
Honda Integra Type S (2004–2006 DC5 Facelift Chassis with K20A Engine)
-
Acura RSX Base & Type-S (2002–2006 DC5 Chassis with K20A2 / K20Z1 / K20A3 Engines)
-
Honda Civic Type R 7th Generation (2001–2005 EP3 Chassis with K20A/K20A2 Engines)
-
Application Note: Also satisfies identical structural pickup orientations found on selected manual Honda Civic EM2, ES1, and EU chassis layouts.
The Mechanical Advantage: Eradicating Powertrain Rotation
Every time you depress the accelerator, the internal combustion process forces the engine crankshaft to spin. By basic laws of physics, an equal and opposite twisting force tries to rotate the entire engine block in the opposite direction inside the engine bay.
If your vehicle is running soft, worn, or split original rubber mounts, this load causes the motor to lurch significantly before the wheels ever receive power. This introduces a noticeable lag in throttle response, contributes to destructive wheel hop on launch, and stresses your header flex pipes and exhaust tracks. Furthermore, as the engine tilts, the manual gear shifter cables pull out of their linear alignment plane, causing rough or missed gear selections near the redline.
The Hardrace 7566 Harden Rubber Engine Mount Set completely resolves this structural weak point. Because the high-density material formulation does not easily deflect under shear stress, the engine remains firmly locked along its engineered axis. Throttle response becomes instantaneous, torque delivery turns linear, and your shifter linkage stays perfectly true—giving you absolute mechanical consistency during aggressive track work or fast street driving.
Professional Engine Support Lift Installation at JDMaster
Get it Fitted by the Specialists: Replacing a full 4-piece engine mount set is a complex job that requires securely bridging and supporting the oil pan, aligning heavy drivetrain assemblies, and gaining access to tight subframe pockets. Corroded subframe hardware or cross-threaded engine bracket bolts can easily lead to major component damage or structural handling alignment issues.
Protect your investment and arrange an installation slot at our state-of-the-art JDMaster.net workshop. Our expert technicians utilize specialized under-hoist engine support fixtures, inspect your chassis mounting brackets for fatigue, and torque all primary fasteners to exact manufacturer specifications under natural weight distribution to guarantee stress-free operation.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| pa_fitments | nan |
|---|








