Hardrace Arm Bushings Complete Set – Honda Integra/Civic/CRX (6107-DC2)

Hardrace Arm Bushings Complete Set – Honda Integra/Civic/CRX (6107-DC2)

Product Overview

Over decades of street use and demanding track sessions, the factory rubber bushings across your front and rear control arms undergo severe degradation. They soften, split, and dry-rot, introducing massive structural deflection into your suspension geometry. The Hardrace Arm Bushings Complete Set – Honda Integra/Civic/CRX (6107-DC2) is the ultimate Master Restoration Package designed to replace every critical pivot bush on your vehicle.

This 26-piece comprehensive full-car array replaces your worn, hyper-compliant factory bushings with Hardrace’s signature high-density hardened rubber compound. By overhauling your front and rear control arm points simultaneously, this master set permanently pins your alignment parameters to their mathematically intended paths—delivering instantaneous cornering turn-in, rock-solid high-speed tracking, and absolute driving confidence.

Key Features & Benefits

• 26-Piece Full Chassis Master Set: Overhauls every major front and rear control arm suspension bushing point in a single, perfectly matched performance kit.

• Locks Down Suspension Geometry: Stops erratic front camber, caster, and rear toe alignment drift under severe cornering, heavy braking, and hard acceleration.

• Signature High-Density Harden Rubber: Formulated to match track-level structural rigidity without the harsh, binding, and noisy characteristics common to polyurethane bushings.

• Eradicates Unprompted Tracking Wander: Eliminates the vague, loose “rear-steering” effect by reinforcing the primary load-bearing pivot points.

• 100% Maintenance-Free Operation: A true set-and-forget suspension overhaul—requires absolutely zero regular lubricating or greasing and will never squeak or bind.

• Direct Press-Fit Engineering: Precision-molded and encased in premium steel sleeves to ensure an exact, trouble-free press-fit into your original stamped-steel or cast suspension arms.

Technical Specifications

What’s Included in the 26-Piece Master Kit?

This comprehensive kit addresses every critical elastomeric link under your chassis, including:

• Front Upper Control Arm Bushings

• Front Lower Control Arm Bushings (Inner and Shock-Mount Positions)

• Rear Upper Control Arm Bushings

• Rear Lower Control Arm Bushings

• Rear Trailing Arm Bushings (Large Main Structural Bushings)

• Front and Rear Stabilizer/Sway Bar Bushings

Applications

This specific Part Number 6107-DC2 hardened rubber master set is engineered to press directly into the factory suspension arms of the following double-wishbone Honda and Acura platforms:

• Honda Integra 3rd Gen (1994–2001 DC2 / DC4 / DB7 / DB8 All Models — Including GS, LS, GSR, and Type R)

• Honda Civic 5th Gen (1992–1995 EG3 / EG4 / EG5 / EG6 / EH2 / EJ1 / EJ2 All Models)

• Honda CRX / Del Sol 3rd Gen (1992–1997 EG1 / EG2 / EH6 All Models)

Chassis Configuration Note: This kit is specifically optimized for the 1994–2001 Integra (DC2) and 1992–1995 Civic (EG) rear suspension architectures. If you own a 1988–1991 (EF) or 1996–2000 (EK) Civic chassis, please browse JDMaster.net for your platform-specific Hardrace catalog variant.

The Mechanical Advantage: The Double-Wishbone Magic

Golden-era Hondas are legendary for their motorsport-derived, double-wishbone front and multi-link rear suspension geometry. However, this beautiful design relies entirely on the suspension arms pivoting cleanly along a single, fixed vertical axis. When your factory bushings become compliant, the arms begin to shift horizontally under load.

When you dive hard into an apex, the front lower arms deflect backward, causing a sudden loss of steering caster and grip. Simultaneously, the rear trailing arms flex inward, triggering dynamic toe-out that causes terrifying, high-speed snap oversteer. The Hardrace 6107-DC2 Master Set provides an unyielding mechanical anchor. It handles massive cornering loads without collapsing or compressing out of alignment. Because it utilizes a highly refined solid rubber matrix rather than rigid plastic polyurethane inserts, it filters out abrasive road harshness—keeping your highway cruising perfectly smooth and civilized.

Professional Hydraulic Pressing & Laser Alignment at JDMaster

Get it Fitted by the Experts: Stripping down your vehicle’s entire suspension array, pressing out 26 stubborn, chemically bonded factory steel shells, and pressing in fresh bearings requires professional-grade shop tools. Incorrect hydraulic orientation can easily distort or permanently ruin the structural control arm casings. Avoid the massive multi-day headache and let the pros do it right! We offer full professional installation and heavy-duty chassis bushing press services right inside our state-of-the-art JDMaster.net workshop.

 Contact us today to secure your workshop appointment!

Warranty

The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.