No products in the basket.
Return to shop
Showing all 12 resultsSorted by latest
Forced Induction
Pulsar – Dual Ball Bearing Turbocharger – Fits for Precision PTE 6266 6266E 6266SP Turbo;, Stock turbo parts Fitment – No modifications required£», Don¡¯t match to PSR 6266E., 62x82mm ,? 7+7 Blade, 66.1 x 74.17mm, 10 Blade, Bearing System: Dual Ball Bearing (provides optimal turbo response & better durability by reducing the shaft-motion), Oil feed fitting: 1/8-27 NPSF(Drawing), Oil drain: T4 flange(Drawing)
Pulsar – Stainless Steel Oil Restrictor for GT/X28/30/35 G25/30/35 Ball Bearing Turbos Dual Ball Bearing Turbocharger – Material: Stainless Steel, Thread Size:-4AN to Oil Line, 7/16-24UNF to Bearing Housing, Orifice Size: 1.0 mm, Application: Turbos with a 7/16-24 UNF Oil Feed Port e.g. PT/X28/30/35 PTG25/30/35 etc., Warning: THIS IS NOT A CORRECT RESTRICTOR FOR JOURNAL BEARING TURBOS!
Pulsar – Dual Ball Bearing Turbocharger – Fits for Precision PTE 6062 Gen2 PT6062SP Turbo;, Stock turbo parts Fitment – No modifications required., Don’t match to PSR 6466E., 60x82mm ,? 7+7 Blade, 61.8x71mm, 10 Blade, Bearing System: Dual Ball Bearing (provides optimal turbo response & better durability by reducing the shaft-motion), Oil feed fitting: 1/8-27 NPSF(Drawing), Oil drain: T4 flange(Drawing)
Pulsar – Precision PTE 6466 GEN2 PT6466SP Turbo CHRA only Dual Ball Bearing Turbocharger – Fits for Precision PTE 6466 GEN2 PT6466SP Turbo;, Stock turbo parts Fitment – No modifications required;, Don’t match to PSR 6466E., 64.4mm / 82.2mm / 87.1mm,? 7+7 Blade, 66.1 / 74.17mm, 10 Blade, Bearing System: Dual Ball Bearing (provides optimal turbo response & better durability by reducing the shaft-motion), Oil feed fitting: 1/8-27 NPSF(Drawing), Oil drain: T4 flange(Drawing)
Pulsar – Dual Ball Bearing Turbocharger – Fits for Precision PTE 6766 6766E 6766SP Turbo ONLY, can’t fit 6766HP;, Stock turbo parts Fitment – No modifications required£», Don¡¯t match to PSR 6766E., 67mm / 82mm / 88mm,? 6+6 Blade, 66.1 / 74.17mm, 10 Blade, Bearing System: Dual Ball Bearing (provides optimal turbo response & better durability by reducing the shaft motion), Oil feed fitting: 1/8-27 NPSF(Drawing), Oil drain: T4 flange(Drawing)
Pulsar – Dual Ball Bearing Turbocharger – 65.7*82.6mm(extended tip diameter: 85.29mm), 68*62.3mm, 4¡å Hose, 2.5¡å Hose, T3 Open, Water Ports: -6AN, Oil Feed: -4AN to the Oil Restrictor, Oil Drain: Std T3 Oil Drain Flange, 2002-?BA?FALCON?XR6, 2004- BF FALCON XR6, 2008- FPV F6/TYPHOON/TORNADO, 2006- TERRITORY, 2008- FG FALCON XR6, 2008- FG FALCON G6E, 1.15 DUAL V-BAND
Pulsar – Oil Feed Flange for PTG Series Turbos Dual Ball Bearing Turbocharger – 0.065-inch port oil feed flange with integrated -4 AN. INSTALLATION COMPONENTS: (one unit) Oil inlet feed O-Ring; (two units) M8X1.25 Bolts PRODUCT COMPATIBILITY: PSR PTG SERIES, including 6270G 7170G 7375G 7975G 7782G 8894G; PSR PRO SERIES, including PRO88 PRO98 PRO106.
Turbosmart Billet Turbo Oil Feed Filter 44um AN-4 – Black
Turbosmart Billet Turbo Oil Feed Filter 44um AN-3 – Black
Turbosmart Billet Turbo Oil Feed Filter 44um AN-4 to AN-4 ORB – Black
Fuel
K-Tuned Center Feed Intake Manifold
K Swap
K-Tuned Center Feed/ITB Throttle Cable – 1250
