Tegiwa Power Steering Rack Loop Delete Kit Honda Civic EG EK Integra DC2
€69.42 Original price was: €69.42.€59.01Current price is: €59.01.
If you're stripping weight from a track or race build, or just want a tidier engine bay, removing the power steering pump, reservoir and hoses is a common step.
Available – Delivery within 15 days
Tegiwa Power Steering Rack Loop Delete Kit for Honda Civic EG EK, Integra DC2 and Nissan S13 S14 S15 – Remove the Pump and Lines, Keep the Rack Healthy
If you’re stripping weight from a track or race build, or just want a tidier engine bay, removing the power steering pump, reservoir and hoses is a common step. The rack still needs looking after once the pump has gone, and that’s what this Tegiwa loop kit is for.
Instead of blanking off the rack’s feed and return ports, the kit joins them together with a loop hose. When you turn the wheel, fluid moves from one side of the rack to the other rather than being trapped and pressurised, as it is when the ports are simply capped. The result is a cleaner manual-feel rack with a more direct, weighted response.
Key Features
- Lets you remove the power steering pump, reservoir and pipework completely
- Loops the rack’s inlet and outlet ports so fluid can still circulate inside the rack
- Avoids the pressure build-up you get from simply capping off the ports
- Gives a heavier, more direct steering feel favoured for track and race use
- Saves weight and frees up space in the engine bay
- One kit covers Honda EG, EK and DC2 racks and Nissan S13, S14 and S15 racks
What’s in the Kit?
- 1 x Loop hose
- Fittings for the rack’s inlet and outlet ports
Fitment
For cars fitted with the factory hydraulic power steering rack:
| Make | Model | Chassis | Years |
|---|---|---|---|
| Honda | Civic | EG | 1991-1995 |
| Honda | Civic (incl. Type R EK9) | EK | 1995-2000 |
| Honda | Integra (incl. Type R) | DC2 | 1994-2001 |
| Nissan | Silvia / 200SX | S13 | 1988-1994 |
| Nissan | Silvia / 200SX | S14 | 1993-1998 |
| Nissan | Silvia | S15 | 1999-2002 |
Not suitable for: the 1990-1993 Integra DA, whose rack has two inlet and two outlet ports, or cars with electric power steering such as the Civic EP3 and Integra DC5.
Installation
Remove the power steering pump, reservoir and hoses, then fit the supplied fittings into the rack’s inlet and outlet ports and connect the loop hose between them. Leave fluid in the rack so the seals stay lubricated. Check that the auxiliary belt routing still works once the pump is removed, because some engines need a different or shorter belt. Steering will be noticeably heavier, especially at parking speeds. We recommend professional fitting.
Why use a loop kit instead of capping the ports?
Capping the ports traps fluid in the rack, so it gets pressurised every time you turn the wheel. Looping the ports lets the fluid pass from one side to the other, which is kinder to the rack and gives a smoother feel.
Will my steering be heavier?
Yes. With no pump there’s no assistance, so expect much heavier steering at low speed. Once the car is moving it’s far easier, and many drivers prefer the extra feedback on track.
Does it fit the Nissan S13, S14 and S15?
Yes. The same kit suits the hydraulic racks on the Nissan S13, S14 and S15 as well as the Honda Civic EG, EK and Integra DC2.
Will it fit my Integra DA or Civic EP3?
No. The 1990-1993 Integra DA rack has a different port layout, and the EP3 and DC5 use electric power steering, so there’s nothing to loop.
Do I need to keep fluid in the rack?
Yes. The point of the loop is that fluid can still move through the rack, which keeps the internal seals lubricated.
Can I refit power steering later?
Yes. The rack itself isn’t modified, so you can remove the loop kit and refit a pump and lines if you change your mind.
Is it suitable for road use?
It’s mainly used on track and race builds. It can be driven on the road, but the heavier steering takes getting used to, and you should tell your insurer about the modification.
What warranty does it have?
It’s covered against defects in materials and workmanship.




