Stainless Steel VTC Locking Pin Honda K-Series K20 K24
€26.70 Original price was: €26.70.€22.70Current price is: €22.70.
A standard K24 runs a 25 degree intake cam gear. Swapping to a Genuine Honda 50 degree VTC actuator gives the K24 more midrange torque and a K20-like feel, but running the full 50 degrees on a K24 can be unsafe.
VTC Limiter Pin for 50 Degree Cam Gears: 40 or 42 Degree Options
A standard K24 runs a 25 degree intake cam gear. Swapping to a Genuine Honda 50 degree VTC actuator gives the K24 more midrange torque and a K20-like feel, but running the full 50 degrees on a K24 can be unsafe. This pin limits the gear to either 42 or 40 degrees, depending on the version you choose.
Because it is a mechanical stop, the gear cannot pass the limit whatever the ECU asks for. It is machined from 316 grade stainless steel for corrosion resistance.
Specifications
- Material: 316 grade stainless steel
- Small pin: limits the VTC gear to 42 degrees
- Big pin: limits the VTC gear to 40 degrees
- For use with: 50 degree intake VTC actuator
- Made in: United Kingdom
Key Features
- Limits a 50 degree VTC gear to 42 or 40 degrees
- Lets a K24 run the 50 degree gear for extra midrange without the full 50 degrees of advance
- Fixed mechanical limit that the ECU cannot override
- 316 grade stainless steel resists corrosion
- Two sizes to suit how much advance your build can safely use
- Machined in the UK
What’s in the Box?
- 1 x stainless steel VTC locking pin (size as selected)
Fitment
- Honda K24 engines fitted with a 50 degree intake VTC actuator, such as the Genuine Honda 50 degree VTC gear
- Honda K20 engines with a 50 degree intake VTC actuator
Not suitable for: engines still running a 25 degree VTC actuator, which already has less range than either pin allows. Upgrade to the Genuine Honda 50 degree VTC gear first.
Installation
The pin is fitted to the 50 degree VTC actuator, which means disturbing the cam timing, so we recommend professional fitting by an experienced engine builder. Check the cam timing before the engine is started, and have the ECU tuned to suit the limit you have chosen. On engines with aftermarket cams or pistons, check piston-to-valve clearance at that limit before running the engine.
Upgrade Further
Pair the pin with the Genuine Honda 50 degree VTC actuator intake cam gear.
Should I choose the Small 42 or Big 40 pin?
The Big pin allows less movement and stops the gear at 40 degrees, while the Small pin allows 42 degrees. The right choice depends on your engine’s cams, pistons and clearances, so check with your engine builder or tuner.
Do I need it if I run the 50 degree gear on a K24?
Running the 50 degree gear unrestricted on a K24 can be unsafe, so we recommend limiting it with one of these pins.
Will it work with my standard 25 degree gear?
There is no need. A 25 degree gear already has less range than either pin allows. The pin is designed to limit a 50 degree gear.
Does the pin come with the cam gear?
No, the Genuine Honda 50 degree VTC gear is sold separately.
Do I need a remap?
Yes. The extra range from a 50 degree gear is only used once the ECU is tuned for it, and the tune should suit the pin you fit.
Will it corrode?
It is made from 316 grade stainless steel, chosen for its corrosion resistance.
| Option | Small 42°, Big 40° |
|---|
Related products
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning








