Innovative Mounts 90-93 Accord Dx/Lx Conversion Engine Mount Kit (F-Series/Auto 2 Manual 90-93 Transmission) – 75A (Black/250-400HP)

Conversion Engine Mount Kit for the 1990-1993 Honda Accord DX/LX (CB)
Designed to fit the stock automatic Accord DX/LX CB7/CB9 chassis with F-Series engines when converting to a manual 1990-1993 transmission.

– Optional Bushing Stiffness’ Available
– No Notching or Trimming of the Hood Required
– Unique no-tear vibration minimizing bushings
– CAD/CAM Designed
– Re-uses Stock/OEM Hardware
– Stress Analyzed
– Lifetime warranty

NOTE:
– In order to use this kit you will need to use the 90-93 Accord F-Series engine timing belt post mount.
Honda Part Number:90008-PM3-000

-This mount kit was specifically made to fit F-Series auto to manual 90-93transmission.If you are swapping from an automatic to a 94-01 F-Series transmission please see:
90-93 ACCORD DX/LX CONVERSION ENGINE MOUNT KIT (F/H-SERIES / AUTO 2 MANUAL 94-01 Transmission) – 29359

NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions).
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving.
Although Innovative’s bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine’s series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts.
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response.