Hardrace Rear Lower Arm – Mazda MX-5 / Miata NB
€1,199.10 Original price was: €1,199.10.€1,019.24Current price is: €1,019.24.
Tubular Type
Harden Rubber Equipped
Stab. Link Included
4 PCS/SET
Available – Delivery within 15 days
Hardrace Rear Lower Control Arms – Mazda MX-5 / Miata NB (Q1253)
Product Overview
The 1998–2005 Mazda MX-5 (NB) is globally celebrated for its near-perfect weight distribution and highly communicative double-wishbone suspension design. However, as these chassis age, decades of hard cornering, weathering, and structural stress take a severe toll on the factory rear lower control arms. The stock steel arms can subtly warp or rust, and more critically, their soft factory rubber bushings dry rot, tear, and crack. This aging creates significant compliance, causing the rear alignment to shift unexpectedly under load—leading to unpredictable snap-oversteer, vague mid-corner feedback, and a disconnected rear axle feel.
The Hardrace Rear Lower Arm Kit – Mazda MX-5 / Miata NB (Q1253) is a heavy-duty, performance-engineered suspension upgrade designed to eliminate compliance and reinforce rear-chassis rigidity. Available at JDMaster.net, these rear lower control arms are manufactured from ultra-high-strength steel alloy to provide uncompromising structural stiffness under severe lateral loads. Equipped with Hardrace’s signature high-density hardened rubber bushings, this kit completely eliminates unwanted arm deflection while preserving necessary street drivability. The result is a dramatic restoration of your Miata’s razor-sharp cornering, steady high-speed tracking, and crisp rear-end feedback.
Key Features & Benefits
-
Ultra-High-Strength Steel Alloy Body: Cold-formed and robotic-welded from premium, thick-gauge steel alloy to deliver vastly superior structural rigidity compared to tired, stamped-steel factory units.
-
Eliminates Dynamic Alignment Shifts: Defeats unwanted flexing and twist under heavy acceleration and hard cornering, keeping your rear toe and camber angles perfectly stable for an unshakeable tire contact patch.
-
High-Durometer Hardened Rubber Bushings: Pre-installed with proprietary, track-tested rubber compounds that are significantly stiffer than OEM. They offer immediate steering response and immediate chassis feedback without the harsh noise, vibration, and harshness (NVH) of solid metal spherical joints.
-
Premium Anti-Corrosion ED Treatment: Every arm undergoes an advanced Electro-Deposition (ED) coating process followed by a highly durable protective paint coat to withstand road salt, moisture, and track-day debris.
-
Direct Bolt-On Integration: Precision CAD-designed to match original factory dimensions, ensuring a perfect, hassle-free installation into the original subframe and knuckle mounting points.
-
Optimizes Power Delivery: By stabilizing the rear lower suspension architecture, these arms minimize wheel hop during hard launches, ensuring smoother power distribution to the rear wheels.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace Global |
| Part Number / SKU | Q1253 |
| Product Type | Heavy-Duty Rear Lower Control Arms |
| Bushing Type | High-Durometer Hardened Rubber |
| Material Base | High-Tensile Tubular & Plate Steel Alloy |
| Placement on Vehicle | Rear Axle – Lower Section (Left & Right Sides Included) |
| Kit Composition | 2 Pieces (Complete Left & Right Arm Assemblies) |
| Installation Status | Direct OEM replacement (Reuses factory mounting bolts) |
Applications
This high-rigidity rear control arm upgrade is engineered exclusively for the second-generation Mazda MX-5 platform:
-
Mazda MX-5 / Miata / Roadster 2nd Gen (1998–2005 NB Chassis — Fits NB1 and NB2 models including 1.6L, 1.8L, and Mazdaspeed Turbo models)
-
Note: Does not fit first-generation NA models due to subtle geometry variances in track width and anti-roll bar mounting tabs.
The Mechanical Advantage: Eliminating Rear-End Sway Under Load
When throwing an NB Miata into a tight apex or managing a slide, massive lateral forces press against the rear tires. This load travels directly through the wheel hub assembly and into the rear lower control arms. The factory components rely on soft, highly compliant rubber bushings intended to mask minor road imperfections during casual daily driving. Under hard performance driving or track-day conditions, this worn or soft rubber deforms and crushes. When the bushing compresses laterally, the entire lower control arm shifts slightly, instantly introducing unwanted dynamic toe changes (bump steer). This causes the rear end of the car to feel loose, nervous, or disconnected right when you need traction most.
The Hardrace Q1253 control arms completely correct this performance barrier. By combining a rigid, non-flexing steel alloy body with high-durometer hardened rubber bushings, the arms maintain their exact geometric position under extreme cornering loads.
As you steer and feed power out of a corner, the mechanical energy transfers immediately to the rear tires rather than being absorbed by a collapsing rubber bushing. This gives you absolute confidence at the limit, allowing you to throttle out earlier with predictable, tire-planting traction.
Professional Lift Installation & Alignment at JDMaster
Get it Fitted by the Specialists: Ensure your Miata is setup correctly by scheduling an installation appointment at our JDMaster.net workshop. Our trained performance technicians will safely rack your NB on a lift, install your Hardrace control arms with precision, and perform a comprehensive performance alignment to optimize your sports car handling.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 12232 kg |
|---|---|
| Dimensions | 54.5 × 38.5 × 16.5 cm |










