Hardrace Front Lower Control Arm + Stab. Link – Subaru BRZ / Toyota 86 / Scion FR-S
€1,079.72 Original price was: €1,079.72.€917.76Current price is: €917.76.
Pillow Ball Equipped.
Adjustable stab. link included
6 PCS/SET
**Stab. link connects to sway bar and control arm
Available – Delivery within 15 days
Hardrace Front Lower Control Arm + Stab. Link – Subaru BRZ / Toyota 86 / Scion FR-S (7778)
Product Overview
The first-generation Subaru BRZ, Toyota 86, and Scion FR-S (ZN6/ZC6) are celebrated worldwide for their pure rear-wheel-drive dynamics, razor-sharp factory turn-in, and highly balanced chassis feedback. However, dropping the vehicle’s ride height on performance coilovers or lowering springs shifts the factory front MacPherson strut geometry out of its optimal operating zone. On lowered vehicles, the front lower arms point upward, pushing the roll center far below the asphalt, causing excessive body roll, and introducing unpredictable bump-steer. Furthermore, the non-adjustable factory stamped-steel front arms make it impossible to adjust front track width or fine-tune aggressive negative camber without using weak, slip-prone eccentric top bolts.
The Hardrace Adjustable Front Lower Control Arm + Stabilizer Link Kit – BRZ / 86 / FR-S (7778) is a motorsport-ready chassis solution engineered to eliminate geometry errors and flexible rubber deflection simultaneously. Available at JDMaster.net, this comprehensive master upgrade features heavy-duty, multi-piece adjustable front arms equipped with premium spherical pillow ball joints, integrated roll center adjusters, and short, adjustable sway bar end links (stabilizer links). By substituting your flexible factory front arms with this high-precision assembly, you can safely correct suspension geometry on slammed or track-oriented cars, stabilize front tire contact patches under heavy loads, and experience absolute mechanical feedback.
Key Features & Benefits
-
Turnbuckle Camber & Track Adjustability: Engineered with a heavy-duty adjustable rod end layout that allows you to easily expand front track width and dial in custom negative camber angles directly on the car.
-
Integrated Roll Center Correctors: Features extended-stem lower ball joints designed to level out the control arm angle on lowered vehicles, restoring the ideal roll center to significantly reduce body roll during quick transitions.
-
Motorsport Spherical Pillow Balls: Replaces squishy factory rubber pivots with high-durability, solid metal spherical pillow ball joints protected by rubber dust boots. This guarantees zero bushing compression and provides instantaneous steering rack response.
-
Adjustable Sway Bar Stabilizer Links: Included in the kit to resolve anti-roll bar binding. These short, adjustable end links allow you to properly eliminate sway bar pre-load after altering the control arm ride height and geometry.
-
Premium Steel Alloy Construction: Fabricated from thick-walled, ultra-high-strength steel alloy to provide uncompromising structural rigidity against hard track curbs, sticky racing tires, and aggressive drift loads.
-
Signature Anti-Corrosion Finish: Coated in Hardrace’s iconic high-durability blue paint and anti-rust plating to deliver elite protection against track-day debris, road grime, and moisture.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 7778 |
| Product Type | Adjustable Front Lower Control Arms with Roll Center Adjusters |
| Joint Type | High-Hardness Spherical Pillow Ball Joints (Pre-Installed) |
| Material Base | High-Tensile Tubular and Plate Steel Alloy |
| Placement on Vehicle | Front Axle – Lower Section (Left & Right Sides Included) |
| Kit Composition | Multi-Piece Set (2x Adjustable Arms, 2x Built-in Ball Joints, 2x Adjustable Short Sway Bar Links) |
| Adjustment Profile | Track Width, Front Camber, and Sway Bar Pre-load |
| Installation Status | Direct bolt-on integration (Professional motorsport alignment mandatory) |
Applications
-
Toyota 86 / GT86 1st Gen (2012–2021 ZN6 Chassis — All models)
-
Subaru BRZ 1st Gen (2012–2021 ZC6 Chassis — All models including Premium, Limited, and Performance Pack variants)
-
Scion FR-S (2013–2016 ZN6 Chassis)
The Mechanical Advantage: Correcting Geometry & Sway Bar Bind
When a ZN6/ZC6 chassis is lowered, the outer ball joint at the steering knuckle rises relative to the inner subframe pivot. This upward tilt pushes the roll center below the ground, increasing the vehicle’s physical body roll layout because the distance between the center of gravity and the roll center operates like a longer leverage arm.
Additionally, altering the arm’s resting angle pulls the factory anti-roll bar out of alignment, causing the end links to bind and artificially changing your spring rates during mid-corner transitions.
The Hardrace 7778 kit resolves this issue by combining geometry correction with complete link adjustability. The extended lower ball joints drop the outer pivot point back down, leveling out the control arm layout. This brings the roll center back up closer to the vehicle’s center of gravity, naturally reducing body roll without forcing you to run bone-jarringly stiff coilover springs.
The included short, turnbuckle-style adjustable stabilizer links allow you to re-align the front sway bar perfectly, completely removing binding and ensuring smooth, predictable body control. Combined with solid spherical pillow balls that eliminate lateral arm flex under heavy braking, your front wheels stay locked into their alignment coordinates for total cornering confidence.
Professional Lift Installation & Alignment at JDMaster
Professional Fitting Note: Ensure your car is dialed in flawlessly by scheduling an installation appointment at our JDMaster.net workshop. Our trained team specializes in complete track setups, drift angle geometry, and precision suspension calibrations.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| pa_fitments | Scion FR-S ZN6 2012-2016, Subaru BRZ ZC6 2012-2021, Toyota 86 GR86 ZN8 2021-PRESENT, Toyota 86 ZN6 2012-2021 |
|---|








