Hardrace Front Camber Kit – Honda Integra DA
€247.68 Original price was: €247.68.€210.53Current price is: €210.53.
For INTEGRA DA 90-93
Bushing Not Included
2PCS/SET
Available – Delivery within 15 days
Hardrace Front Camber Kit – Honda Integra DA (7641)
Product Overview
When second-generation Honda Integra models are lowered on coilovers or sport springs, the factory upper control arm configuration forces the front wheels into an aggressive, unadjustable negative camber state. The Hardrace Front Camber Kit – Honda Integra DA (7641) is the definitive engineering solution designed to provide independent, high-accuracy alignment control.
This adjustable front upper arm set features a rugged structural steel assembly equipped with Hardrace’s signature high-density hardened rubber bushings. By replacing your fixed-length factory upper arms, this kit allows track day builders and restomod enthusiasts to dial in perfect alignment specs—restoring high-speed stability, razor-sharp steering feedback, and uniform tire life.
Key Features & Benefits
-
Precision Camber Adjustment: Allows simple, sliding adjustability to easily correct alignment geometry deviations caused by aggressive chassis lowering.
-
Signature High-Density Harden Rubber Bushings: Pre-installed with an anti-crack, high-tensile rubber matrix that provides track-level structural rigidity without the harsh, noisy binding common to polyurethane.
-
One-Piece Heavy-Duty Steel Layout: Engineered with industrial-grade steel alloys following an ultra-robust OE structural profile for maximum occupant safety under heavy racing loads.
-
Enhances Steering & Tracking Stability: Maximizes the front tire contact patch, providing linear mechanical grip across mid-corner apexes and under heavy braking.
-
Advanced Anti-Corrosion Treatment: Features a premium Electro-Deposition (ED) coating process and weather-resistant paint to guarantee an extended service life in harsh conditions.
-
Direct Bolt-On Replacement: Built to factory CAD specifications to slip directly into original chassis shock tower pockets using original mounting hardware.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 7641 |
| Product Type | Adjustable Front Upper Control Arms / Camber Kit |
| Bushing Compound | Proprietary High-Density Hardened Performance Rubber |
| Material Construction | High-Strength Heavy-Duty Steel Alloy |
| Quantity in Set | 2 Pieces / Full Front Axle Set (Left and Right Sides) |
| Adjustment Capabilities | Independent Front Negative / Positive Camber Correction |
| Placement on Vehicle | Front Upper Chassis / Shock Tower Suspension Pocket |
Applications
This specific Part Number 7641 adjustable hardened rubber camber arm array is engineered exclusively for second-generation double-wishbone Honda platforms:
-
Honda Integra 2nd Gen (1990–1993 DA5 / DA6 / DA7 / DA8 / DA9 / DB1 Chassis – Including XSi, RSi, and USDM GS, LS, RS, and GS-R models)
The Mechanical Advantage: Double-Wishbone Linearity
The second-generation DA Integra utilizes a motorsport-derived double-wishbone front suspension design. While highly effective at managing dynamic handling, lowering the vehicle significantly modifies the operating angle of the upper arm, pulling the upper ball joint inward. Because the original factory control arm is cast as a single, fixed-length steel piece, it offers zero mechanical adjustment to counteract this transformation.
Leaving your camber uncorrected results in extreme inner tire wear and creates an unstable straight-line tracking experience. Furthermore, decades of stress cause the original factory bushings to suffer from material compliance. Under heavy lateral loads, this structural deflection allows the wheel hub to shift unexpectedly, dulling steering center-line clarity.
The Hardrace Adjustable Front Upper Arms address both challenges simultaneously. The sliding adjuster plate securely locks your custom alignment specifications into place, while the solid, non-voided hardened rubber pivots drastically minimize horizontal arm deflection. This delivers immediate steering response and constant tire tracking accuracy without introducing abrasive road vibrations into the vehicle cabin.
Professional Laser Alignment & Torque Verification at JDMaster
Get it Fitted by the Experts: Replacing front upper arms on the DA chassis requires careful disassembly inside the tight shock tower cavities, where aged factory fasteners are prone to seizing or stripping. Additionally, adjustable suspension arms must be tightened precisely under true ride-height load to prevent binding the rubber bushings.
Avoid the garage hassle and book an appointment at our specialized JDMaster.net workshop. Our master technicians will cleanly install the Hardrace arms, inspect your front upper ball joints, and run your vehicle through our high-precision 4-wheel motorsport laser alignment rack to dial in your tracking parameters perfectly.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 3.883 kg |
|---|---|
| Dimensions | 41.5 × 27 × 10.5 cm |
Related products
Suspension





