Hardrace Complete Bushing Kit – Honda Integra DA
€495.68 Original price was: €495.68.€421.33Current price is: €421.33.
Harden Rubber Equipped
28 PCS/SET
For DA 90-93 Use
Available – Delivery within 15 days
Hardrace Complete Bushing Kit – Honda Integra DA (7730)
Product Overview
Restore factory-fresh handling precision, eliminate elastic suspension deflection, and completely revitalize your classic second-generation double-wishbone architecture. Over decades of performance driving, structural loading, and environmental exposure, original equipment rubber bushings dry-rot, tear, and collapse. This extensive material degradation introduces significant physical play into the control arms, leading to vague steering response, wandering alignment parameters, and a disconnected chassis feel.
The Hardrace Complete Bushing Kit – Honda Integra DA (7730) is an all-inclusive chassis restoration master package engineered to lock down your suspension tracking. Available at JDMaster.net, this premium 22-piece performance collection replaces your weathered, soft factory rubber anchors with solid, high-durometer vulcanized hardened rubber bushings. By securing every control arm and trailing link firmly along its engineered axis, this comprehensive kit delivers razor-sharp feedback and predictable handling without the continuous squeaking or harsh binding common with aftermarket polyurethane alternatives.
Key Features & Benefits
-
Comprehensive 22-Piece Master Set: Completely overhauls the entire chassis, covering the front upper/lower control arms, front compliance perches, rear upper/lower control arms, trailing arms, and toe links.
-
Signature High-Durometer Harden Rubber: Formulated from a non-voided, anti-crack performance elastomeric compound designed to resist extreme multi-axis shear stress and compressive loads.
-
Arrests Dynamic Alignment Deviation: Prevents suspension arms from shifting off-axis under heavy cornering or braking forces, keeping your tire contact patch uniform.
-
Restores Sharp Steering & Turn-In: Eliminates mechanical dead zones within the suspension layout, ensuring immediate steering wheel input translates directly to front axle directional changes.
-
Zero-Maintenance Operation: Engineered with premium synthetic properties that require absolutely no manual lubrication, remaining completely silent and squeak-free.
-
Direct O.E. Press-Fit Dimensional Profiles: Molded to precise CAD measurements to press directly into your standard factory stamped-steel or cast iron control arms.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Hardrace |
| Part Number / SKU | 7730 |
| Product Type | Heavy-Duty Complete Vehicle Bushing Master Kit |
| Material Base | High-Density Solid Performance Harden Rubber |
| Total Component Count | 22 Pieces / Full Vehicle Overhaul Set |
| Chassis Location | Front & Rear Upper/Lower Control Arms, Trailing Arms, Toe Links, Compliance Links |
Master Kit Component Breakdown
This master structural overhaul package includes 22 heavy-duty components tailored to refresh the primary pivot positions of your DA chassis:
-
Front Upper Arm Bushings: Secures the upper wishbone anchor to the inner shock towers, eliminating mid-corner camber drift.
-
Front Lower Arm Bushings: Rebuilds the inner pivot points where the front track handles lateral cornering loads.
-
Front Compliance Bushings: Replaces the critical high-stress front radius arm bushings to stabilize tracking under hard braking.
-
Rear Upper Arm Bushings: Tightens the rear upper geometry to prevent rear camber fluctuations.
-
Rear Lower Arm Bushings: Anchors the rear lower control arms to keep the rear track predictable.
-
Rear Trailing Arm Bushings (RTA): Overhauls the large, critical rear pivot point to eradicate trailing arm twist and rear-end steering effects.
-
Rear Toe Link Bushings: Restores exact static and dynamic toe tracking over pavement ripples.
Applications
This specific Part Number 7730 master bushing kit is engineered explicitly for golden-era second-generation double-wishbone suspension configurations:
-
Honda Integra 2nd Gen (1990–1993 DA5 / DA6 / DA7 / DA8 / DA9 / DB1 / DB2 Chassis – Fits all models including RS, LS, GS, and the iconic B17A1-equipped GS-R)
The Mechanical Advantage: Reclaiming Golden-Era Double-Wishbone Agility
The second-generation DA Integra owes its legendary handling capabilities to its pure double-wishbone layout, which relies on consistent control arm geometry to manage alignment arcs during suspension travel. However, if those arms are anchored by soft, split, or degraded rubber bushings, your cornering forces are wasted twisting and compressing the worn rubber inside its metal sleeves. This structural deflection causes your camber, caster, and toe settings to drift wildly mid-corner, leading to unpredictable understeer and vague handling.
The Hardrace 7730 Complete Bushing Kit resolves this vulnerability. By eliminating the large internal air voids found in stock rubber designs, the high-durometer performance rubber compound resists distortion under extreme shear loads. Your suspension links are strictly confined to their intended vertical operating arcs, allowing your shocks, springs, and sway bars to work efficiently. The result is an immediate restoration of off-center steering communication, flat cornering tracking, and absolute chassis stability under harsh driving pressures.
Professional Hydraulic Press Installation at JDMaster
Get it Fitted by the Specialists: Extracting 22 old, seized bushings from factory steel arms requires a heavy-duty hydraulic workshop press, specialized backing dies, and expert mechanical care. Attempting to hammer, burn, or force these out can easily warp or bend the control arm structures, permanently ruining your alignment geometry.
Skip the safety hazards and schedule an installation slot at our state-of-the-art JDMaster.net workshop. Our factory-trained automotive technicians will safely press out your weathered factory components, cleanly seat the new Hardrace units to exact depth specifications, and secure all suspension arms under natural ride-height pre-load to prevent premature bushing wear.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 5.731 kg |
|---|---|
| Dimensions | 25 × 21 × 14 cm |
| pa_fitments | Honda Integra DA 1990-1993 |



