Hybrid Racing K-Series Swap Conversion Wiring Harness (88-91 Civic/CRX)
€290.20 Original price was: €290.20.€246.67Current price is: €246.67.
With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!
Available – Delivery within 15 days
Hybrid Racing K-Series Swap Conversion Wiring Harness (88-91 Civic/CRX)
- Plug and play K-Swap conversion harness!
- Brand new OEM connectors and pins
- Free phone and email tech support.
- Powering 1000’s of K-Swaps world wide!
With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversion harness on the market. This conversion harnesses powers thousands of K-Swaps all over the world!
The K-Swap harness interfaces with your factory dash harness, your OEM K-Series engine harness and your K-Series ECU allowing for a simple plug-and-play K-Swap.
What engine harness does the Hybrid Racing conversion harness work with?
- This harness works with all USDM / JDM 02-04 wiring harnesses, including, K20A, K20A2, and K20A3.
- This harness is wired to use the factory wideband O2 sensor so European customers using the UKDM K20A/K20A2 wiring harness will need to convert the harness to use the narrowband type sensor.
- This harness does NOT work with any 05-06 OR K24 engine wiring harnesses and ECU.
What type of connectors and pins do you use?
When we construct a Hybrid Racing harness, we utilize brand new connectors, terminals, and wire sourced from the same company that Honda utilizes for their connectors. These connectors are ordered in bulk from Japan and ensure that you get all new parts. In addition, all new connectors decrease the chance for errors in the harness as we do not solder any of the joints. Every harness is machine-made and human checked, so they are issue-free.
What if I have questions or problems?
To ensure a trouble-free install, all wires are labeled and neatly packaged. The most valuable thing you get when you purchase a Hybrid Racing harness is full tech support. This tech support extends beyond your harness and includes help with anything associated with your swap. If you have any problems at all with the swap, just give us a call and a tech will get you the information you need. It’s like having a buddy down the street who has already done hundreds of K swaps!
View Install Guide HERE
Fitment
- This harness fits 1988-1991 Honda Civic (EF chassis) and 1988-1991 Honda CRX performing a K-Series engine swap. Compatible with 02-04 USDM and JDM K20A, K20A2, and K20A3 engine harnesses and their corresponding ECUs.
- Not compatible with: 05-06 K-Series engine harnesses, K24 engine harnesses, or any K24 ECU. UKDM customers will need to adapt the wideband O2 sensor connection to narrowband.
Technical details
- SKU HYB-CWH-01-07
- Chassis Application 1988-1991 Honda Civic (EF), 1988-1991 Honda CRX
- Compatible Engine Harnesses 02-04 USDM K20A2, K20A3 / 02-04 JDM K20A
- Incompatible Harnesses 05-06 K-Series, K24 (all variants)
- ECU Compatibility OEM K-Series ECUs matching 02-04 harness (PRB, PND, and JDM equivalents); KPro-compatible
- Connector Source OEM Japanese manufacturer (same supplier as Honda OEM production)
- Joint Construction Crimped and sealed terminals throughout; no solder joints
- Assembly Method Machine-assembled, hand-inspected
- Wire Labeling Yes – all wires labeled
- Core Harness Required No
- Gauge Cluster Retention Yes – full factory EF gauge cluster function retained
- UKDM Compatibility Partial – wideband to narrowband O2 adapter required
- Tech Support Included Yes
Included
- 1x Hybrid Racing K Swap Conversion Harness (HYB-CWH-01-07), fully assembled and tested
- All connectors pre-installed on both the EF dash harness side and the K-Series engine harness side
- All wires labeled for identification during installation
- Access to Hybrid Racing tech support for K-swap wiring questions
- Note: No core harness is required. Your factory EF dash harness is not modified and does not need to be sent in.
Related products
Electronics
Electronics
Electronics
Electronics
Electronics










