Honda Civic Type R EP3 Integra DC5 01-06 K20A Service Kit
€81.35 Original price was: €81.35.€73.22Current price is: €73.22.
Everything you need for an oil service on your EP3 Civic Type R or DC5 Integra Type R, in one kit.
Available – Delivery within 15 days
K20A Oil Service Kit with Liqui Moly 5W-40 and Genuine Honda Filter
Everything you need for an oil service on your EP3 Civic Type R or DC5 Integra Type R, in one kit. The K20A is famous for revving hard all the way to its redline, and fresh, high-quality oil is the best protection you can give it. This kit pairs a 5-litre can of Liqui Moly Molygen New Generation 5W-40 fully synthetic oil with a Genuine Honda oil filter and a new Genuine Honda sump plug washer, so the job is done properly with the correct parts.
You can then build the kit into a full service by adding the extras you need from the options above: an air filter, pollen filter, spark plugs, gearbox oil and a magnetic drain plug. Each is chosen specifically for the EP3 and DC5, so there’s no guesswork about what fits.
What’s in the Kit?
- 1 x Liqui Moly Molygen New Generation 5W-40 fully synthetic engine oil, 5 litres
- 1 x Genuine Honda oil filter (15400-PLM-A02)
- 1 x Genuine Honda sump plug washer
Optional Extras
Select any of these above before adding the kit to your basket:
- Air filter: a Genuine Honda element for a factory-spec replacement, or a K&N performance filter that’s washable and reusable.
- Pollen filter: a Genuine Honda cabin filter, or a J’s Racing Hamp filter.
- Spark plugs: a set of 4 NGK Laser Iridium or NGK Iridium plugs suited to the K20A.
- Gearbox oil: 2 litres of Genuine Honda MTF-3 manual transmission fluid. The EP3 and DC5 gearbox takes approx. 1.9 litres, so 2 litres covers a full change.
- Magnetic drain plug: a Tegiwa magnetic engine sump plug and/or a magnetic gearbox drain plug, which catch metal particles before they circulate.
Liqui Moly Molygen New Generation 5W-40
Molygen New Generation is a fully synthetic engine oil with Liqui Moly’s Molecular Friction Control (MFC) additive technology, which reduces friction and wear inside the engine. It helps prevent deposits forming, protects against wear and keeps the engine clean, which suits a high-revving engine like the K20A. It meets ACEA A3/B4 and API SN, and it’s made in Germany.
Fitment
- Honda Civic Type R EP3 (2001-2005), K20A2 engine
- Honda Integra Type R DC5 (2001-2006), K20A engine
Not suitable for other Type R generations. For those, see our FN2 Service Kit, FK2 Service Kit, FK8 Service Kit, FL5 Service Kit, EK4 VTi / EK9 Type R Service Kit or DC2 Integra Type R Service Kit.
Doing the Service
Warm the engine first so the oil drains fully. Remove the sump plug, let the old oil drain, then refit the plug with the new washer. Replace the oil filter, lightly oiling the new filter’s seal before fitting. Refill with fresh oil, run the engine briefly, check for leaks, then let it settle and top up to the full mark on the dipstick. Dispose of the old oil responsibly at a recycling centre. If you’re not confident doing the job yourself, any competent garage can fit the kit for you.
How much oil does the K20A take?
The EP3 and DC5 K20A takes approximately 4.5 litres with a filter change. The 5-litre can covers a full service and leaves a little for topping up between services. Always fill to the dipstick rather than pouring in the whole amount.
Is 5W-40 suitable for my Type R?
Yes. A fully synthetic 5W-40 is a popular, proven choice for the K20A, offering strong protection at high revs and high oil temperatures, which suits track days and spirited driving. If you’d like to use a different grade, contact us and we can tailor the kit.
How often should I service my EP3 or DC5?
Follow your service schedule, which for the K20A is typically every 12 months or around 12,000 miles. If you do track days or drive hard regularly, change the oil and filter more often, ideally after every few track days.
Do I need to change the gearbox oil?
Gearbox oil isn’t part of a routine oil service, but fresh MTF-3 keeps gear changes smooth, especially on high-mileage cars or cars that see track use. Many owners change it far more often than Honda’s original schedule. The optional 2 litres of Genuine Honda MTF-3 is enough for a full change.
Why fit a magnetic drain plug?
A magnetic drain plug catches small metal particles from normal wear, so they don’t keep circulating with the oil. It also gives you an easy way to check what’s coming out of your engine or gearbox at each service.
Which spark plugs should I choose?
Both NGK options suit the K20A. The Laser Iridium plugs offer the longest life, while the NGK Iridium plugs are a great-value performance alternative. If your car is tuned or heavily modified, check with your tuner which heat range they recommend.
Related products
On sale
Engine Tuning
Service Parts
Service Parts



