Mugen Carbon Fibre Front Spats Honda Prelude BF1 26+

Mugen Carbon Fibre Front Spats Honda Prelude BF1 26+

Mugen’s carbon front spats (front splitter) fit beneath the standard front bumper of the BF1 Prelude, sharpening the nose and giving the car a lower, wider stance from the front three-quarter view.

They are made from dry carbon, which is pressed and cured under heat and pressure for a stiffer, lighter part than wet-laid carbon, and finished in a gloss clear coat. Fin-shaped details at each side add a subtle motorsport touch without making the front end look aggressive.

Specifications

• Drop: approx. 29mm lower than the standard front bumper
• Material: Dry carbon fibre
• Finish: Gloss clear coat
• Fitting time: approx. 1.0 hour

Key Features

• Dry carbon construction, light and stiff
• Gloss clear coat finish
• Sits approx. 29mm below the standard front bumper
• Fin-shaped side details
• Designed by Mugen alongside its other Prelude carbon parts for a matched look

What’s in the Box?

• Carbon front splitter (front spats)

Fitment

• Honda Prelude BF1

Not suitable for: earlier Prelude generations or the Civic Type R FL5, which needs the Mugen FL5 front splitter.

Installation

Mugen quotes approx. 1.0 hour to fit, working to its installation instructions. The bumper area must be clean and dry, and the fit should be checked carefully before final tightening. Because it adds a carbon part at the lowest point of the car, take extra care on kerbs and steep ramps. Professional fitting is recommended.

Is this part of the Mugen Prelude Spec III kit?

Yes, it is one of the carbon parts used in Mugen’s limited Body Kit Spec III. The Spec III kit itself was a 16-set lottery release and has sold out, but the individual carbon parts can still be ordered separately.

Will it scrape on speed bumps?

It sits approx. 29mm lower than the standard bumper, so you will have a little less ground clearance at the front. Approach steep ramps and speed bumps slowly and at an angle.

Does it need painting?

No. It is supplied in exposed dry carbon with a gloss clear coat, ready to fit.

Can I fit it on its own?

Yes. Unlike the rear spats, the front spats do not depend on any other Mugen part.

Part reference

• 71110-XPD-K0S0

With roots in Japanese motorsport dating back to 1973, Mugen holds a distinctive place in Honda’s performance heritage. Its history in race-engine development and competition shapes a range of performance parts and accessories prized by Honda enthusiasts for their engineering, purposeful design and unmistakable identity.