Hardrace Rear Upper Camber Kit – Infiniti FX Series
€892.11 Original price was: €892.11.€758.29Current price is: €758.29.
Harden Rubber Equipped.
2PCS/SET
Available – Delivery within 15 days
Hardrace Rear Upper Camber Kit – Infiniti FX Series / QX70 (7800)
Product Overview
The Infiniti FX Series and QX70 luxury crossover platform utilizes an advanced, sport-tuned multi-link rear suspension layout designed to deliver car-like cornering precision. However, when these premium SUVs are lowered on performance lowering springs or sport coilovers, the factory geometry forces an aggressive shift into non-adjustable negative camber. Left uncorrected, this excessive inward tilt results in severe inner tire tread wear and reduces overall stability by shrinking your tire’s resting contact patch.
The Hardrace Rear Upper Camber Kit (7800) is a high-strength adjustable suspension solution engineered to overcome these fixed design limitations. Available at JDMaster.net, this heavy-duty control arm kit replaces your fixed factory rear upper links with high-strength steel adjustable units. Pre-assembled with high-durometer hardened rubber bushings, this kit allows track technicians or performance alignment shops to dial your rear camber values precisely back to original factory specifications for daily road safety, or optimize them for flat, uniform tire footprint tracking through high-speed highway corners.
Key Features & Benefits
-
Precision Camber Calibration: Provides continuous length adjustment across a broad operational window, allowing you to easily correct negative camber issues caused by reduced ride heights.
-
High-Density Vulcanized Rubber: Pre-installed with Hardrace’s signature high-durometer, anti-crack hardened rubber bushings. They deliver a dramatic reduction in alignment flex under load while preserving premium cabin comfort.
-
Minimizes Structural Flex: Extruded from heavy-gauge, high-tensile carbon steel, these arms act as robust structural braces that resist lateral twist and deformation under aggressive chassis loads.
-
Maximized Tire Longevity: Stabilizes the physical angle of the rear wheels to promote uniform tread wear across the entire tire surface, protecting your high-performance wheel investments.
-
Premium ED Anti-Corrosion Finish: Treated with an advanced Electrophoretic Deposition (ED) protective base layer and industrial outer paint coating to resist rust from moisture, dirt, and winter road salt.
-
Direct Bolt-On Integration: Manufactured to strict structural tolerances as a direct replacement upgrade that pairs flawlessly with your original rear crossmember subframe and hub knuckles.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 7800 |
| Product Type | Adjustable Rear Upper Control Arms (Camber Kit) |
| Bushing Configuration | High-Density, Anti-Crack Vulcanized Hardened Rubber |
| Material Base | High-Strength Heavy-Gauge Carbon Steel |
| Piece Count | 2 Pieces / Set (Complete Rear Axle Left & Right Arms) |
| Finish Protection | Industrial Anti-Rust Electrophoretic Deposition (ED) Coating |
| Installation Layout | Direct OE replacement design (Full alignment required) |
Applications
-
Infiniti FX35 / FX37 / FX50 (2009–2013 — S51 Chassis)
-
Infiniti QX70 (2014–2017 — S51 Chassis)
The Mechanical Advantage: Taming Lowered Multi-Link SUV Geometry
Altering the ride height on a heavy luxury vehicle like an Infiniti FX causes the short upper links of the rear multi-link suspension to travel upward faster than the lower control arms. This architectural layout causes a severe change in alignment lines under load. Because the factory rear upper control arms feature fixed lengths with minimal eccentric bolt adjustability, standard adjustment tracks cannot compensate for the resulting negative camber drop.
The Hardrace 7800 adjustable upper arms resolve this physical restriction by introducing a continuous adjustment turnbuckle sleeve. By lengthening the arm, technicians can gently press the top of the rear knuckle outward, returning the wheel angle to a neutral plane. Furthermore, by swapping out soft factory compliance elements for high-density vulcanized rubber pivots, your rear tire tracking angles stay firmly locked in place through high-speed lane changes, removing the unpredictable rear-end squirm common to heavy performance luxury crossovers.
Professional Lift Installation & Alignment Notes
Technical Fitting Note: The Hardrace 7800 kit replaces critical structural components governing rear axle alignment tracking. Because adjusting these arms simultaneously alters rear camber lines, track width, and rear steering toe parameters, a professional four-wheel laser alignment is strictly mandatory immediately following installation.
To maximize bushing life and prevent internal rubber tearing, the final tightening sequence for the inner chassis bushing bolts must be performed strictly while the vehicle is resting under its own full weight at natural ride height on a drive-on lift or alignment rack. Tightening the suspension arm pivots while the car is hanging freely twists the rubber elements permanently, leading to premature splitting and an inaccurate ride height calculation. You can arrange a precision setup appointment at our fully equipped JDMaster.net workshop, where our technicians specialize in high-precision suspension indexing, geometry correction, and laser tracking setups.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| pa_fitments | Infiniti QX70 / FX Series S51 2008-2017 |
|---|
Related products
Suspension









