Hardrace Harden Engine Mount Set – Honda Civic FD (7384)

Product Overview

In the 8th-generation Honda Civic chassis, the transverse powertrain layout shifts significantly during acceleration, deceleration, and cornering. While factory engine mounts are engineered to absorb engine vibrations for maximum cabin comfort, their soft, hollow rubber construction degrades quickly under spirited driving. As these stock mounts wear out or tear, the engine pitches back and forth, causing delayed throttle response, imprecise gear shifts, and wheel hop during hard acceleration.

The Hardrace Harden Engine Mount Set – Honda Civic FD (7384) is a 5-piece direct replacement upgrade designed to stabilize the powertrain configuration. Available at JDMaster.net, this set features reinforced steel mount housings pre-installed with Hardrace’s proprietary high-density hardened rubber compound. By upgrading to these heavy-duty mounts, you significantly restrict engine pitching, ensuring that engine torque transfers immediately to the wheels instead of being lost to chassis movement.

Key Features & Benefits

• 5-Piece Replacement Set: Upgrades the primary engine and transmission mount locations to control core powertrain shifting.

• High-Density Hardened Rubber: Stiffer than factory compounds to stabilize engine positioning while maintaining a practical balance between performance and cabin vibration compared to solid polyurethane mounts.

• Direct Bolt-On Fitment: Engineered to match exact original equipment measurements for a seamless installation using existing subframe mounting points.

• Sharper Throttle Feedback: Minimizes engine rocking during sudden throttle changes, providing a faster mechanical connection to the front wheels.

• Cleaner Gear Selection: Keeps the transmission casing stable to prevent shift cables from binding under heavy load, ensuring smoother gear engagement.

• Reinforced Steel Castings: Structural steel outer shells are built to handle the stresses of track days, spirited street driving, and modified power outputs.

Technical Specifications

Applications

This 5-piece engine mount set is engineered specifically to match the chassis configurations and engine brackets of the following 8th-generation models:

• Honda / Civic 2-Door Coupe / 2006-2011 / 2.0i SI (US)

The Mechanical Advantage: Controlling the Torque Axis

Under acceleration, an internal combustion engine generates an equal and opposite rotational force that pushes against the chassis. In a front-wheel-drive car like the Civic FD, the engine rocks along its rotational axis. Standard factory mounts utilize large internal voids to isolate the cabin, allowing the motor to rock out of place by several inches.

The Hardrace 7384 kit removes this mechanical lag by using solid, high-durometer rubber elements inside reinforced steel shells. When torque forces are applied, the hardened compound resists compression, keeping the motor firmly in position. This stabilization keeps your shift linkages aligned, prevents exhaust downpipe binding, and ensures immediate throttle response by eliminating engine slack from the drivetrain equation.

Professional Installation Notes

Installation Guidelines: For professional fitting, you can book an installation appointment at our fully equipped JDMaster.net workshop, where our technicians handle full powertrain upgrades, chassis tuning, and performance adjustments.

Warranty

The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.