Hardrace Front Lower Harden Engine Mount – Honda Civic (5827-B)
€120.09 Original price was: €120.09.€102.08Current price is: €102.08.
2 PCS/SET
Below the Radiator
Available – Delivery within 15 days
Hardrace Front Lower Harden Engine Mount – Honda Civic (5827-B)
Product Overview
Target specific powertrain instability, eliminate alignment-destroying engine pitching, and secure maximum torque tracking across your front axle. While full multi-piece mount replacement sets cater to complete engine bay overhauls, it is often individual high-load points that endure the brunt of structural stress. On sixth-generation Honda Civic platforms, the lower torque anchors near the front subframe are constantly subjected to severe multi-axis forces during aggressive launches and rapid deceleration phases.
The Hardrace Front Lower Harden Engine Mount – Honda Civic (5827-B) is a specialized, targeted performance reinforcement solution. Available at JDMaster.net, this heavy-duty individual torque mount replaces your soft or torn original equipment lower damper with a solid, high-durometer vulcanized hardened rubber unit. By removing localized mechanical compliance right at the structural frame rail interface, it stabilizes the engine block’s rotational arc—delivering crisp throttle response and direct power delivery while controlling excessive cabin harshness.
Key Features & Benefits
-
Targeted Rotational Control: Functions as a dedicated forward torque damper, arresting the violent backward and forward pitching of the engine block during sudden load changes.
-
Signature High-Durometer Harden Rubber: Outfitted with an ultra-dense, non-voided performance rubber insert engineered to resist multi-axis shear stress far better than factory open-air designs.
-
Maximizes On-Throttle Traction: Minimizes localized drivetrain displacement, helping to keep your front tire contact patches perfectly loaded to prevent sudden wheel hop.
-
Protects Primary Engine Mounts: By absorbing intense rotational load spikes, this lower anchor shields your main driver-side, transmission-side, and rear firewall mounts from premature wear and tearing.
-
Street-Optimized NVH Absorption: Provides track-ready structural stiffness without creating the harsh, continuous interior vibration characteristic of solid aluminum or track polyurethane dampers.
-
Direct Bolt-On Subframe Fitment: CAD-designed to slip natively into standard factory mounting locations, reusing original automotive fastening hardware.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 5827-B |
| Product Type | Heavy-Duty Front Lower Torque Engine Mount (Individual) |
| Material Compound | High-Hardness Vulcanized Performance Harden Rubber & Treated Steel |
| Mount Durometer Profile | Optimized for Street Performance / Spirited Track Use |
| Quantity in Set | 1 Piece / Individual Front Lower Torque Dampener |
| Chassis Location | Front Lower Powertrain Structure to Left-Front Frame Rail Position |
Comprehensive Platform Compatibility
This high-rigidity Part Number 5827-B structural lower torque mount features specialized casting geometries that make it a precise, direct fit for the following vehicle architectures:
-
Honda Civic 6th Gen (1996–2000 EK3 / EK4 / EK5 / EK9 / EJ6 / EJ7 / EJ8 / EJ9 / EM1 Chassis — Fits Coupe, Hatchback, Sedan, and Type R variations)
-
Honda Integra 3rd Gen (1994–2001 DC2 / DB7 / DB8 / DC2 Type R Chassis Profiles)
-
Honda Civic Del Sol (1992–1998 EG1 / EG2 Chassis Variants)
-
Honda CR-V 1st Gen (1997–2001 RD1 / RD2 / RD3 Multi-Link AWD/FWD Layouts)
The Mechanical Advantage: Isolating the Core Layout (5827 vs. 5827-B)
When mapping out your chassis reinforcement strategy, understanding component grouping is key. While the standard Hardrace 5827 kit is a comprehensive 5-piece system that replaces every primary structural mount in the engine bay, the 5827-B is a dedicated, single front lower torque mount.
In golden-era Honda double-wishbone and MacPherson tracking configurations, the lower torque mounts act as the first line of defense against engine rotation. When you accelerate hard, the engine naturally attempts to roll backward along its transverse line. If this lower anchor features weathered, cracked, or fluid-leaked factory rubber, the motor shifts off-axis instantaneously. This movement creates a dynamic pull on your CV axles, throwing off suspension weight distribution and causing violent wheel hop.
The Hardrace 5827-B individual upgrade corrects this weakness directly. Because the high-density performance rubber compound contains zero internal void slots, it locks down horizontal component movement. Drivetrain power is directed immediately through the transmission to the wheels, improving throttle connection and mid-corner tracking behavior out of tight switchbacks.
Professional Service & Lift Installation at JDMaster
Get it Fitted by the Specialists: Replacing front lower torque mounts often requires accessing tightly recessed subframe perches where factory bolts have experienced years of road grime and moisture exposure. Standard driveway hand tools run a high risk of stripping or cross-threading these critical frame rail fastening threads.
Skip the hassle and schedule an installation slot at our state-of-the-art JDMaster.net workshop. Our factory-trained suspension and drivetrain specialists will safely lift your vehicle, cleanly extract the worn factory torque unit, bolt in the new Hardrace component to exact factory torque specifications, and inspect your remaining engine anchors for signs of material fatigue.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 1.034 kg |
|---|---|
| Dimensions | 20.3 × 15.2 × 10 cm |
| pa_fitments | EH, EJ1/2, EJ6/7/8/9, EM1, Honda Civic 5th 1992-1996 EG, Honda Civic 6th 1996-2000 EK3/4/5/9, Honda CR-V 1st RD1-RD3 1997-2001, Honda Del sol EG1/2 1992-1998, Honda Integra DC2 1994-2001, Honda Integra DC2 Type R 1995-1998 |





