Hardrace Harden Engine Mount Set – Honda (7567)
€454.55 Original price was: €454.55.€386.37Current price is: €386.37.
5 PCS/SET
For MT B16/B18 Use
Street Version
Available – Delivery within 15 days
Hardrace Harden Engine Mount Set – Honda (7567)
Product Overview
On golden-era B-series Honda platforms, factory engine mounts utilize soft, heavily voided rubber designed to isolate the cabin from minor mechanical harmonics. Over decades of high-RPM operation and aggressive torque transitions, these original components split and sag. This structural compliance allows the entire powertrain assembly to violently shift forward and backward under acceleration and braking phases.
The Hardrace Harden Engine Mount Set – Honda (7567) is the ultimate street-performance intervention engineered to stabilize your engine block. Available at JDMaster.net, this premium 5-piece reinforced mount kit substitutes your tired, flexible factory isolators for solid, high-durometer hardened rubber. By capturing and anchoring the powertrain along its intended mechanical axis, this kit eliminates destructive wheel hop and maximizes throttle response without producing the punishing noise, vibration, and harshness (NVH) of track-only solid aluminum mounts.
Key Features & Benefits
-
Eradicates Powertrain Torque Twist: Strongly restrains excessive motor pitch during sudden throttle changes, channeling latent kinetic energy instantly to the drive wheels.
-
Signature High-Density Harden Rubber: Vulcanized using an elite, non-porous rubber compound designed to maintain maximum dimensional stability and resist tearing under extreme shear stress.
-
Comprehensive 5-Piece Structural Kit: Replaces all critical engine and transmission torque positions, providing a total mechanical refresh for the left, right, rear, and forward lower torque dampening channels.
-
Sharper, Linear Manual Shifting: Prevents the transmission casing from shifting off-axis under load, ensuring manual shift linkages remain aligned to isolate and eliminate missed gears or binding at high RPM.
-
Optimized NVH Performance Buffer: Carefully engineered to deliver a direct mechanical connection between the drivetrain and the chassis while retaining enough material elasticity to filter out harsh street vibration.
-
Direct Uncompromised OEM Replacement: Precision-cast to exact original equipment measurements to sit flush into standard factory chassis points using standard fastening hardware.
Technical Specifications
| Feature | Specification |
| Brand | Hardrace |
| Part Number / SKU | 7567 |
| Product Type | Heavy-Duty Reinforced Drivetrain Engine Mount Set |
| Material Compound | High-Durometer Solid Performance Harden Rubber |
| Transmission Profiles | Manual Transmission (MT) Models Only |
| Usage Classification | Street / Trackday Performance Setup |
| Quantity in Set | 5 Pieces / Full Powertrain Configuration (3 Primary Mounts + 2 Torque Mounts) |
| Chassis Location | Powertrain Structural Casings to Engine Bay Frame Rails |
Applications
This specific Part Number 7567 high-density 5-piece engine mount collection is carefully sized for 3-bolt timing side configurations and manual B-series drivetrain setups:
-
Honda Integra 3rd Gen (1994–2001 DC2 / DB8 / DC4 Chassis – Fits all manual models including LS, GS, GS-R, and the legendary Type R)
-
Honda Civic 5th Gen (1992–1995 EG / EH / EJ Chassis – Fits manual models equipped with the 3-bolt aluminum driver-side engine mount configuration)
-
Honda CRX / Civic Del Sol (1993–1997 EG2 / EG1 Chassis – Fits 3-bolt driver-side mount manual setups)
The Mechanical Advantage: Direct Torque Delivery vs. Material Compliance
When a high-revving B-series engine climbs toward VTEC engagement, the sudden surge in torque exerts a tremendous rotational force against the chassis. If your vehicle is relying on loose, weathered, or fluid-leaking factory mounts, this sudden force causes the engine block to twist drastically inside the bay. This shift introduces a delayed throttle lag, forces the exhaust header connections to strain under tension, and triggers severe frontend wheel hop—which breaks traction and risks damaging your CV axles.
The Hardrace 7567 upgrade completely transforms your vehicle’s power delivery kinetics. Because the high-density performance rubber compound eliminates internal voids, it resists compression under load. The engine is held firmly in place, forcing the rotational force of the crankshaft to translate directly into immediate tire bite. The result is a highly connected throttle feel, seamless mid-corner power modulation, and absolute stability through fast directional changes.
Professional Engine Support Lift Installation at JDMaster
Get it Fitted by the Specialists: Extracting and changing a full 5-piece engine mount configuration requires dedicated under-hoist lifting tackle, temporary powertrain balancing, and careful unbolting of structural subframe tabs. Corroded or cross-threaded engine block studs can instantly lead to costly repairs if handled incorrectly on a driveway.
Skip the safety risks and schedule an appointment at the JDMaster.net workshop. Our factory-trained automotive technicians will safely suspend your engine, inspect your chassis mounting ears for metal fatigue, cleanly press or bolt in the new Hardrace units, and torque all primary structural fasteners to factory specs under true loaded weight distribution.
Warranty
The warranty on Hardrace products depends on the type of product, with a minimum warranty period of 2 years. This warranty does not cover damage caused by a car crash, improper use, negligence or normal wear and tear.
Warranty by product type
| Rubber bushes | 5 years |
| Spherical bushes | 2 years |
| Adjustable arms with rubber inserts | 5 years |
| Adjustable arms with spherical inserts | 2 years |
| Engine mounts | 5 years |
| Sway bars | Lifetime warranty |
| Bushes and endlinks | 5 years |
| Billet inserts | Lifetime warranty |
| Chassis brace | Lifetime warranty |
| Ball joints/tie rods | 2 years |
| Weight | 5.5 kg |
|---|---|
| Dimensions | 21.2 × 20.9 × 13.3 cm |
| pa_fitments | EH, EJ1/2, Honda Civic 5th 1992-1996 EG, Honda Del sol EG1/2 1992-1998, Honda Integra DC2 1994-2001, Honda Integra DC2 Type R 1995-1998 |
Related products
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning
Engine Tuning









